Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
- Cisco Community
- Technology and Support
- Wireless - Mobility
- Wireless
- Re: Import a config.txt to another Aironet 1832
Options
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Mute
- Printer Friendly Page
2094
Views
6
Helpful
22
Replies
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-05-2025 12:00 AM
Hello,
The master aironet 1832 from our network crashed between wednesday and friday.
I did a backup of its config, so I have a config.txt file up to date.
As we need to have the master for some production usages (I don't know why, a laptop or a smartphone can connect to the SSID with the other APs, but some older devices can't if the master AP is not online), I would like to import this config file on a "slave" AP to put it as the "new master".
To avoid breaking more the network, how would you advice me to import the config file to the target AP?
I can console to this AP, but I don't have web access to it (neither HTTP nor HTTPS).
Thank you.
Solved! Go to Solution.
Labels:
- Labels:
-
Aironet Access Points
22 Replies 22
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-07-2025 05:23 AM
- @smorinval Could you now post the complete boot process from the AP ?
M.
-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-07-2025 05:33 AM
Sure, here it is (I'm just modifying the MAC and IP addresses for a better security) :
[03/23/2023 18:52:43.8569] Restarting system.
[03/23/2023 18:52:43.8869] Going down for restart now
U-Boot 2012.07 (btldr release 30) (Mar 03 2017 - 19:13:24)
This product contains some software licensed under the
"GNU General Public License, version 2" provided with
ABSOLUTELY NO WARRANTY under the terms of
"GNU General Public License, version 2", available here:
http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
DRAM: 1 GiB
NAND (ONFI): Detected SPANSION S34MS02G2 [256 MiB]
SF: Detected Macronix MX25U3235F [4 MiB]
MFG data loaded
Scanning shenv data blocks
Total valid parts=4
Active shenv part[0:0], write_counter=9
PCI0 Link Intialized
PCI1 Link Intialized
Net:
PHY ID = 0x4dd074, eth0 found AR8033 PHY
PHY ID = 0x4dd074, eth1 found AR8033 PHY
Valid I2C chip addresses: 51 52
AP 1832 . detected...
Power Type: Power Brick detected...
Signature returns 0
BL signing verification success, continue to run...
Auto boot mode, use bootipq directly
Hit ESC key to stop autoboot: 0
Specified BOOT: part1
Booting from part1
Read 1024 bytes from volume part1 to 45000000
Read 47891785 bytes from volume part1 to 45000000
Signature returns 0
Image signing verification success, continue to run...
Using machid 0x1260 from environment
Starting image ...
[01/01/1970 00:00:00.0000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5387d
[01/01/1970 00:00:00.0000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[01/01/1970 00:00:00.0000] Machine: Cisco Systems 11ac Wave2 Wifi Access Point
[01/01/1970 00:00:00.0000] Memory policy: ECC disabled, Data cache writealloc
[01/01/1970 00:00:00.0000] Kernel command line: ubi.mtd=0 crashkernel=500M-:64M@1280M console=ttyHSL1,9600n8 activepart=part1 activeboot=0 wdgtriggered=0
[01/01/1970 00:00:00.1500] CPU1: Booted secondary processor
[01/01/1970 00:00:00.2200]
[01/01/1970 00:00:00.2200] +++ hydra_ap_gpio_value =2
[01/01/1970 00:00:29.8908] ACPU PVS: 2
[01/01/1970 00:00:32.4000] buginf tty flushing thread started, ttyport=ef3efe90
[*01/01/1970 00:00:38.8180] buginf() enabled.
[*01/01/1970 00:00:38.8280] Made it into bootsh: Dec 11 2017 19:17:50
[*01/01/1970 00:00:38.8280] bootsh build T-77294235f9c17ab4e3b18b46a484118a1eb8a4b6-g77294235-vipendya
Welcome to Cisco.
Usage of this device is governed by Cisco's End User License Agreement,
available at:
http://www.cisco.com/c/en/us/td/docs/general/warranty/English/EU1KEN_.html.
Restricted Rights Legend
Use, duplication, or disclosure by the Government is subject to
restrictions as set forth in subparagraph (c) of the Commercial
Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and
subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
This product contains some software licensed under the
"GNU General Public License, version 2" provided with
ABSOLUTELY NO WARRANTY under the terms of
"GNU General Public License, version 2", available here:
http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
This product contains some software licensed under the
"GNU Library General Public License, version 2" provided
with ABSOLUTELY NO WARRANTY under the terms of "GNU Library
General Public License, version 2", available here:
http://www.gnu.org/licenses/old-licenses/lgpl-2.0.html
This product contains some software licensed under the
"GNU Lesser General Public License, version 2.1" provided
with ABSOLUTELY NO WARRANTY under the terms of "GNU Lesser
General Public License, version 2.1", available here:
http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html
This product contains some software licensed under the
"GNU General Public License, version 3" provided with
ABSOLUTELY NO WARRANTY under the terms of
"GNU General Public License, Version 3", available here:
http://www.gnu.org/licenses/gpl.html.
This product contains some software licensed under the
"GNU Affero General Public License, version 3" provided
with ABSOLUTELY NO WARRANTY under the terms of
"GNU Affero General Public License, version 3", available here:
http://www.gnu.org/licenses/agpl-3.0.html.
error: open /dev/board-config
error: open /dev/board-config
error: open /dev/board-config
error: open /dev/board-config
init started: BusyBox v1.23.2 (2017-12-11 18:56:13 PST)
[*01/01/1970 00:00:42.2869] GCM-128 POST passed
[*01/01/1970 00:00:42.2869] GCM-256 POST passed
[*01/01/1970 00:00:42.5468] Volume ID 4, size 372 LEBs (47235072 bytes, 45.0 MiB), LEB size 126976 bytes (124.0 KiB), dynamic, name "storage2", alignment 1
[*01/01/1970 00:00:42.5868] mount: mounting /dev/ubivol/storage2 on /storage2 failed: Invalid argument
[*01/01/1970 00:00:42.8568] Active version: 8.6.101.0
[*01/01/1970 00:00:42.8568] Backup version: 8.5.161.0
Jan 1 00:00:42 FIPS[1627]: *** shell: FIPS Mode = disabled ***
User Access Verification
Username: [*01/01/1970 00:00:43.0867]
[*01/01/1970 00:00:43.0867] led pattern module start
[*01/01/1970 00:00:43.1367] AP1832I
[*01/01/1970 00:00:43.2266] nss_driver - Turbo Support 1
[*01/01/1970 00:00:43.2266] Supported Frequencies - 110Mhz 550Mhz 733Mhz
[*01/01/1970 00:00:43.2666] NSS firmware booted
[*01/01/1970 00:00:43.2866] NSS firmware booted
[*01/01/1970 00:00:43.7465] Current value of FACTORY_RESET=0
[*03/31/2020 23:59:59.0000] Last reload time: Mar 23 18:52:40 2023
[*03/23/2023 18:52:40.0000] Setting system time Thu Mar 23 18:52:40 UTC 2023
[*03/23/2023 18:52:40.0699] device wired0 entered promiscuous mode
[*03/23/2023 18:52:40.5098] stile module dp init successfully
[*03/23/2023 18:52:40.5098] NBAR Label:BLD_MCP_DEV_LATEST_20150424_123021 NBAR VERSION:module build date: Dec 11 2017 at 19:14:44
[*03/23/2023 18:52:41.1996] miibus get ef44e400!
[*03/23/2023 18:52:41.2296]
[*03/23/2023 18:52:41.2396] boot 434 build T-77294235f9c17ab4e3b18b46a484118a1eb8a4b6-g77294235-vipendya board corsica mac 12:34:56:78:9A:BC
[*03/23/2023 18:52:41.2496] Module: mbedtls .text=0xbf000000 data=0xbf007e18 bss=0xbf008070
[*03/23/2023 18:52:41.2496] Module: aptrace .text=0xbf00c000 data=0xbf01a82c bss=0xbf01ada0
[*03/23/2023 18:52:41.2496] Module: led_module .text=0xbf024000 data=0xbf0244e0 bss=0xbf024b48
[*03/23/2023 18:52:41.2496] Module: qca_nss_gmac .text=0xbf028000 data=0xbf02ebbc bss=0xbf02f080
[*03/23/2023 18:52:41.2496] Module: qca_nss_drv .text=0xbf038000 data=0xbf053f80 bss=0xbf054d30
[*03/23/2023 18:52:41.2496] Module: qca_nss_capwapmgr .text=0xbf075000 data=0xbf079a74 bss=0xbf079bc8
[*03/23/2023 18:52:41.2496] Module: nssmgrctl .text=0xbf080000 data=0xbf0817d0 bss=0xbf081b08
[*03/23/2023 18:52:41.2496] Module: proclikefs .text=0xbf087000 data= bss=0xbf087b40
[*03/23/2023 18:52:41.2496] Module: stile_lm_ft .text= data= bss=
[*03/23/2023 18:52:41.2496] Module: stile_lm_dp .text= data= bss=
[*03/23/2023 18:52:41.2496] Module: ipv6 .text=0xbfa1c000 data=0xbfa4cf00 bss=0xbfa4e7ac
[*03/23/2023 18:52:41.2496] Module: bonding .text=0xbfa68000 data=0xbfa79628 bss=0xbfa79a54
[*03/23/2023 18:52:41.2496] Module: lowmemorykiller .text=0xbfa86000 data=0xbfa862c0 bss=0xbfa8644c
[*03/23/2023 18:52:41.2496] Module: qca_nss_profile_drv .text=0xbfa8a000 data=0xbfa8b324 bss=0xbfa8b498
[*03/23/2023 18:52:41.2496] Module: scsi_wait_scan .text= data= bss=
[*03/23/2023 18:52:41.2496] Module: ssdk_reg .text=0xbfa94000 data= bss=0xbfa94838
[*03/23/2023 18:52:41.6895] Last reload reason : 1: reload command
[*03/23/2023 18:52:43.3190] __mm_init_module
[*03/23/2023 18:52:43.3689]
[*03/23/2023 18:52:43.3689] __ol_ath_attach() Allocated scn ee440480
[*03/23/2023 18:52:43.3789] ol_ath_attach interface_id 0
[*03/23/2023 18:52:43.3789] Chip id: 0x9, chip version: 0x1000000
[*03/23/2023 18:52:43.3789]
[*03/23/2023 18:52:43.3789] Target Version is 1000000
[*03/23/2023 18:52:43.3789]
[*03/23/2023 18:52:43.3789] Flash Download Address c0000
[*03/23/2023 18:52:43.3789] ol_transfer_bin_file: flash data file defined
[*03/23/2023 18:52:43.3789] Cal location [0]: 00000000
[*03/23/2023 18:52:43.3789]
[*03/23/2023 18:52:43.3789] Wifi0 NAND FLASH Select OFFSET 0x1000
[*03/23/2023 18:52:43.3989] qc98xx_verify_checksum: flash checksum passed: 0xafda
[*03/23/2023 18:52:43.3989] ol_transfer_bin_file 3982: Download Flash data len 12064
[*03/23/2023 18:52:43.4189]
[*03/23/2023 18:52:43.4189] Board data initialized
[*03/23/2023 18:52:43.4689] ol_ath_download_firmware :First OTP download and Execute is good address:0xa000 return param 4660
[*03/23/2023 18:52:43.4689] ol_ath_download_firmware:##Board Id 8 , CHIP Id 1
[*03/23/2023 18:52:43.4689] ol_transfer_bin_file: Board Data File download to address=0xc0000 file name=AR900B/hw.2/boardData_AR900B_CUS260_negative_pwr_offset_2G_v2_008.bin
[*03/23/2023 18:52:43.5489]
[*03/23/2023 18:52:43.5489] [Flash] : Ignore Module param
[*03/23/2023 18:52:43.5489] ol_ath_download_firmware : Second OTP download and Execute is good, param=0x0
[*03/23/2023 18:52:43.5789] ol_transfer_bin_file: Downloading firmware file: AR900B/hw.2/athwlan.bin
[*03/23/2023 18:52:44.6685] HTC Rx: insufficient length, got:4 expected =8
[*03/23/2023 18:52:44.6785] Startup Mode-0 set
[*03/23/2023 18:52:44.6785] HTC Service:0x0300 ep:1 TX flow control disabled
[*03/23/2023 18:52:44.6785] HTC Service:0x0100 ep:2 TX flow control disabled
[*03/23/2023 18:52:44.6785] Firmware_Build_Number:70
[*03/23/2023 18:52:44.6785] num_rf_chain:0x00000003 ht_cap_info:0x0000185b vht_cap_info:0x339a79b2 vht_supp_mcs:0x0000ffea
[*03/23/2023 18:52:44.6785]
[*03/23/2023 18:52:44.6785] RES CFG Support wmi_service_bitmap 9778
[*03/23/2023 18:52:44.6785]
[*03/23/2023 18:52:44.6785] Sending Ext resource cfg: HOST PLATFORM as 0 and fw_feature_bitmap as 50 to TGT
[*03/23/2023 18:52:44.6785] ol_ath_service_ready_event: sw_cal_support_check_flag: 1
[*03/23/2023 18:52:44.7485] wmi_ready_event_rx: WMI UNIFIED READY event
[*03/23/2023 18:52:44.7485] htt_h2t_frag_desc_bank_cfg_msg - HTT_H2T_MSG_TYPE_FRAG_DESC_BANK_CFG sent to FW for radio ID = 0
[*03/23/2023 18:52:44.7585] spectral_init_netlink 78 NULL SKB
[*03/23/2023 18:52:44.7585] ACS not enabled
[*03/23/2023 18:52:44.7585] ol_ath_thermal_mitigation_attach: --
[*03/23/2023 18:52:44.7585]
[*03/23/2023 18:52:44.7585] __ol_ath_attach() Allocated scn ede80480
[*03/23/2023 18:52:44.7685] ol_ath_attach interface_id 1
[*03/23/2023 18:52:44.7685] Chip id: 0x9, chip version: 0x1000000
[*03/23/2023 18:52:44.7785]
[*03/23/2023 18:52:44.7785] Target Version is 1000000
[*03/23/2023 18:52:44.7785]
[*03/23/2023 18:52:44.7785] Flash Download Address c0000
[*03/23/2023 18:52:44.7785] ol_transfer_bin_file: flash data file defined
[*03/23/2023 18:52:44.7785] Cal location [1]: 00004000
[*03/23/2023 18:52:44.7785]
[*03/23/2023 18:52:44.7785] wifi1 NAND FLASH Select OFFSET 0x5000
[*03/23/2023 18:52:44.7985] qc98xx_verify_checksum: flash checksum passed: 0xbab4
[*03/23/2023 18:52:44.7985] ol_transfer_bin_file 3982: Download Flash data len 12064
[*03/23/2023 18:52:44.8185]
[*03/23/2023 18:52:44.8185] Board data initialized
[*03/23/2023 18:52:44.8685] ol_ath_download_firmware :First OTP download and Execute is good address:0x9c00 return param 4660
[*03/23/2023 18:52:44.8685] ol_ath_download_firmware:##Board Id 7 , CHIP Id 1
[*03/23/2023 18:52:44.8685] ol_transfer_bin_file: Board Data File download to address=0xc0000 file name=AR900B/hw.2/boardData_AR900B_CUS239_negative_pwr_offset_5G_v2_007.bin
[*03/23/2023 18:52:44.9385]
[*03/23/2023 18:52:44.9385] [Flash] : Ignore Module param
[*03/23/2023 18:52:44.9385] ol_ath_download_firmware : Second OTP download and Execute is good, param=0x0
[*03/23/2023 18:52:44.9684] ol_transfer_bin_file: Downloading firmware file: AR900B/hw.2/athwlan.bin
[*03/23/2023 18:52:45.6782] FWLOG: [49472] WAL_DBGID_TX_AC_BUFFER_SET ( 0x3, 0x1e, 0x94c, 0x94c, 0x0 )
[*03/23/2023 18:52:45.6782] FWLOG: [49472] WAL_DBGID_TX_AC_BUFFER_SET ( 0x12, 0x1e, 0x94c, 0x94c, 0x0 )
[*03/23/2023 18:52:45.6782] FWLOG: [49472] WAL_DBGID_TX_AC_BUFFER_SET ( 0x45, 0x1e, 0x94c, 0x94c, 0x0 )
[*03/23/2023 18:52:45.6782] FWLOG: [49472] WAL_DBGID_TX_AC_BUFFER_SET ( 0x67, 0x1e, 0x94c, 0x94c, 0x0 )
[*03/23/2023 18:52:46.0681] HTC Rx: insufficient length, got:4 expected =8
[*03/23/2023 18:52:46.0681] Startup Mode-0 set
[*03/23/2023 18:52:46.0681] HTC Service:0x0300 ep:1 TX flow control disabled
[*03/23/2023 18:52:46.0681] HTC Service:0x0100 ep:2 TX flow control disabled
[*03/23/2023 18:52:46.0681] Firmware_Build_Number:70
[*03/23/2023 18:52:46.0681] num_rf_chain:0x00000004 ht_cap_info:0x0000185b vht_cap_info:0x339b79b2 vht_supp_mcs:0x0000ffaa
[*03/23/2023 18:52:46.0681]
[*03/23/2023 18:52:46.0681] RES CFG Support wmi_service_bitmap 9778
[*03/23/2023 18:52:46.0681]
[*03/23/2023 18:52:46.0681] Sending Ext resource cfg: HOST PLATFORM as 0 and fw_feature_bitmap as 50 to TGT
[*03/23/2023 18:52:46.0681] ol_ath_service_ready_event: sw_cal_support_check_flag: 1
[*03/23/2023 18:52:46.1381] wmi_ready_event_rx: WMI UNIFIED READY event
[*03/23/2023 18:52:46.1381] htt_h2t_frag_desc_bank_cfg_msg - HTT_H2T_MSG_TYPE_FRAG_DESC_BANK_CFG sent to FW for radio ID = 1
[*03/23/2023 18:52:46.1481] acfg_attach: Offload using existing sock edf2fc00
[*03/23/2023 18:52:46.1481] spectral_init_netlink 78 NULL SKB
[*03/23/2023 18:52:46.1481] ACS not enabled
[*03/23/2023 18:52:46.1481] ol_ath_thermal_mitigation_attach: --
[*03/23/2023 18:52:46.1881] pktlog_init: Initializing Pktlog for AR900B, pktlog_hdr_size = 16
[*03/23/2023 18:52:46.1881] pktlog_init: Initializing Pktlog for AR900B, pktlog_hdr_size = 16
[*03/23/2023 18:52:47.0678] FWLOG: [50859] WAL_DBGID_TX_AC_BUFFER_SET ( 0x3, 0x1e, 0x94c, 0x94c, 0x0 )
[*03/23/2023 18:52:47.0678] FWLOG: [50859] WAL_DBGID_TX_AC_BUFFER_SET ( 0x12, 0x1e, 0x94c, 0x94c, 0x0 )
[*03/23/2023 18:52:47.0678] FWLOG: [50859] WAL_DBGID_TX_AC_BUFFER_SET ( 0x45, 0x1e, 0x94c, 0x94c, 0x0 )
[*03/23/2023 18:52:47.0678] FWLOG: [50859] WAL_DBGID_TX_AC_BUFFER_SET ( 0x67, 0x1e, 0x94c, 0x94c, 0x0 )
[*03/23/2023 18:52:47.9575] pid 2619's current affinity mask: 3
[*03/23/2023 18:52:47.9575] pid 2619's new affinity mask: 1
[*03/23/2023 18:52:50.6167]
[*03/23/2023 18:52:50.6167] Click sched monitor: schedulers = 1
[*03/23/2023 18:52:53.5358] click-config/io-real.click:139: While configuring 'todev_wired0 :: ToDevice':
[*03/23/2023 18:52:53.5358] warning: device 'wired0' is down
[*03/23/2023 18:52:53.5858] click-config/io-real.click:139: While configuring 'fromdev_wired0 :: FromDevice':
[*03/23/2023 18:52:53.5858] warning: device 'wired0' is down
[*03/23/2023 18:52:54.5055] click-config/io-real.click:139: While initializing 'tohost_wired0 :: ToHost':
[*03/23/2023 18:52:54.5055] warning: device 'wired0' is down
[*03/23/2023 18:52:55.0053] wmi_dbg_cfg_send: mod[0]00000000 dbgcfg40000000 cfgvalid[0] 00000000 cfgvalid[1] 00000000
[*03/23/2023 18:52:55.0053] wmi_dbg_cfg_send: mod[0]00000000 dbgcfg40000000 cfgvalid[0] 00000000 cfgvalid[1] 00000000
[*03/23/2023 18:52:56.0550] chatter: tohost_srcr6 :: ToHost: device 'srcr6' went down
[*03/23/2023 18:52:56.0750] chatter: tohost_srcr6 :: ToHost: device 'srcr6' came up
[*03/23/2023 18:52:56.0850] ip6_port srcr6, ip6local f3b0::5331:76ff:f3b0:8d30, ip6 ::, plen 0, gw6 ::, gw6_mac 00:00:00:00:00:00, mtu 1500, vid 0, mode6 3(slaac)
[*03/23/2023 18:52:57.5446] wired0: 1000 Mbps Full Duplex
[*03/23/2023 18:52:57.5446]
[*03/23/2023 18:53:04.1125] Loading sha2...
[*03/23/2023 18:53:04.1125] Dumpping sha1...
[*03/23/2023 18:53:05.7720] Loading MIC cert and key
[*03/23/2023 18:53:05.7820] Dumpping sha2...
[*03/23/2023 18:53:07.4715] Loading MIC cert and key
[*03/23/2023 18:53:07.8413] Generating key, this may take a while...
[*03/23/2023 18:53:09.6608] Public key portion is:
[*03/23/2023 18:53:09.6608] ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCIXw/zwgUX7ybD8qip4A68uztdSfTbuUTrab5Hqu/ZXTXN9eDgEZLYVaHh2PO3bOMM9Z6M6oU2k9HWA60/NKUKvwic2bNZ12KVZ0fVvH2NLwO5A0pXnhB3PuDAir5dfKgwD9WCnRzPcrslB0In58KNU1WP4r9G4tRzGNXAVJj2ZRhyToc4M6n1D5CzQwJDz5LrsNI8OflcBVObXFUEY/hGhdaRdsEb+/gTOUaxcfw0XAGkFBq8dPYf4dpfaHGDtQzCCkttMI2qBKIkkZFjXnsqu00ovPeGgARG+pVtB3sB8xQuWRHHEUSWmeX641yc43tnciT+OXGbHsFa7BFzPtXf root@m5CE176803DE0
[*03/23/2023 18:53:09.6608] Fingerprint: md5 c0:66:3e:5f:91:2c:91:37:5d:cd:55:53:2f:55:e1:8f
[*03/23/2023 18:53:09.7308] pid 4138's current affinity mask: 3
[*03/23/2023 18:53:09.7308] pid 4138's new affinity mask: 1
[*03/23/2023 18:53:10.2006] Password for 'Cisco' changed
[*03/23/2023 18:53:10.3306] gzip -dc /etc/wcp.usermodule.template.gz | sed -e 's/__TX_POWER_2G_FILE__/\/radio_fw\/S2.csv/g' -e 's/__TX_POWER_5G_FILE__/\/radio_fw\/S5.csv/g' -e 's/__EVM_POWER_2G_FILE__/\/radio_fw\/EVM_2.csv/g' -e 's/__EVM_POWER_5G_FILE__/\/radio_fw\/EVM_5.csv/g' -e 's/__DOMAIN_2G__/1/g' -e 's/__DOMAIN_5G__/12/g' -e 's/__PWR_TABLE_49G__/0/g' -e 's/__PRODUCT_ID__/AIR-AP1832I-E-K9/g' -e 's/__AP_TYPE__/58/g' -e 's/__WIRELESS_MAC__/12:34:56:78:9A:BE/g' -e 's/__WIRED_MAC__/12:34:56:78:9A:BD/g' -e 's/__WIRED1_MAC__/12:34:56:78:9A:BC/g' | DMALLOC_OPTIONS=debug=0x400003,inter=1000,log=/tmp/wcp.dmalloc.log,limit=40000000 wcpd &
[*03/23/2023 18:53:11.9001] CRIT-MeshControl:
[*03/23/2023 18:53:11.9001] Mesh Control: skipped adding wired1 backhaul
[*03/23/2023 18:53:11.9101] DOT11_DRV[0]: Init Radio0
[*03/23/2023 18:53:11.9301] DOT11_DRV[0]: Stop Radio0
[*03/23/2023 18:53:11.9301] DOT11_DRV[0]: set_channel Channel set to 6
[*03/23/2023 18:53:11.9401] DOT11_DRV[1]: Init Radio1
[*03/23/2023 18:53:11.9601] DOT11_DRV[1]: Stop Radio1
[*03/23/2023 18:53:11.9701] DOT11_DRV[1]: set_channel Channel set to 36
[*03/23/2023 18:53:12.4299] DOT11_CFG[0] Radio Mode is changed from Local to FlexConnect
[*03/23/2023 18:53:12.4299] DOT11_DRV[0]: Start Radio0
[*03/23/2023 18:53:12.4399] DOT11_CFG[1] Radio Mode is changed from Local to FlexConnect
[*03/23/2023 18:53:12.4399] DOT11_DRV[1]: Start Radio1
[*03/23/2023 18:53:12.4499] DOT11_DRV[0]: Stop Radio0
[*03/23/2023 18:53:12.7998] DOT11_DRV[0]: set_channel Channel set to 1
[*03/23/2023 18:53:12.7998] DOT11_DRV[0]: Start Radio0
[*03/23/2023 18:53:12.7998] DOT11_DRV[0]: Channel set to 1, width 20
[*03/23/2023 18:53:12.7998] DOT11_DRV[0]: Stop Radio0
[*03/23/2023 18:53:12.8298] DOT11_DRV[0]: Channel set to 1, width 20
[*03/23/2023 18:53:12.8298] DOT11_DRV[0]: wifi0 acfg cmd 26 failed for wifi0 errno 22(Invalid argument)
[*03/23/2023 18:53:12.8298] DOT11_DRV[0]: vendor_set_max_client Setting Client Limit failed for Radio 0, Result: -1
[*03/23/2023 18:53:12.8298] DOT11_DRV[1]: Stop Radio1
[*03/23/2023 18:53:12.8498] DOT11_DRV[1]: set_channel Channel set to 36
[*03/23/2023 18:53:12.8498] DOT11_DRV[1]: Start Radio1
[*03/23/2023 18:53:12.8498] DOT11_DRV[1]: Stop Radio1
[*03/23/2023 18:53:12.8698] DOT11_DRV[1]: Start Radio1
[*03/23/2023 18:53:12.8698] DOT11_DRV[1]: Channel set to 36, width 20
[*03/23/2023 18:53:12.8698] DOT11_DRV[1]: Stop Radio1
[*03/23/2023 18:53:13.2497] DOT11_DRV[1]: Channel set to 36, width 20
[*03/23/2023 18:53:13.2497] DOT11_DRV[1]: wifi1 acfg cmd 26 failed for wifi1 errno 22(Invalid argument)
[*03/23/2023 18:53:13.2497] DOT11_DRV[1]: vendor_set_max_client Setting Client Limit failed for Radio 1, Result: -1
[*03/23/2023 18:53:13.2497] Failed to load flex AP config from file. Default config will be used.
[*03/23/2023 18:53:13.2497] Socket Valid Element wcp/wcp_db Handler set_vlan_name_map Data Length 10
[*03/23/2023 18:53:17.2584] Waiting for uplink IPv4 configuration
[*03/23/2023 18:53:17.2684] Gateway not reachable. IP address will not be assigned. IP:1.1.1.230/24 Gateway:1.1.1.1
[*03/23/2023 18:53:19.8776] ethernet_port wired0, ip 1.1.1.230, netmask 255.255.255.0, gw 1.1.1.1, mtu 1500, bcast 1.1.1.255, dns1 8.8.4.4, dns2 8.8.8.8, vid 0, static_ip_failover false, dhcp_vlan_failover false
[*03/23/2023 18:53:28.3949] DOT11_CFG[0] Radio Mode is changed from FlexConnect to FlexConnect
[*03/23/2023 18:53:28.3949] DOT11_CFG[1] Radio Mode is changed from FlexConnect to FlexConnect
[*03/23/2023 18:53:28.4449] AP IPv4 Address updated from 0.0.0.0 to 1.1.1.230
[*03/23/2023 18:53:28.4749] dtls_init: Use MIC certificate
[*03/23/2023 18:53:28.4749]
[*03/23/2023 18:53:28.4749] CAPWAP State: Init
[*03/23/2023 18:53:28.4749]
[*03/23/2023 18:53:28.4749] PNP is not required, Starting CAPWAP discovery
[*03/23/2023 18:53:28.4749]
[*03/23/2023 18:53:28.4849]
[*03/23/2023 18:53:28.4849] CAPWAP State: Discovery
[*03/23/2023 18:53:28.4849] Discovery Request sent to 255.255.255.255, discovery type UNKNOWN(0)
[*03/23/2023 18:53:28.4849]
[*03/23/2023 18:53:28.4849] CAPWAP State: Discovery
[*03/23/2023 18:53:29.4846] Discovery Response from 1.1.1.226
[*03/23/2023 18:55:15.0000] aptrace_add_timer: timer already added
[*03/23/2023 18:55:15.0000]
[*03/23/2023 18:55:15.0000] CAPWAP State: DTLS Setup
Username:Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-07-2025 05:59 AM
Here is the boot process (sorry for late answer, I was pretty sure I clicked on Reply button).
I'm changing the MAC and IP addresses to keep some security inside.
cli: AP Rebooting: CLI triggered reboot(reload command)
Writing reload timestamp (Thu Mar 23 18:40:28 UTC 2023) to disk
AP5CE1.7680.3DE0#[03/23/2023 18:40:29.7532] UBIFS: un-mount UBI device 0, volume 3
The system is going down NOW!
Sent SIGKILL to all processes9]
Requesting system reboot29]
[03/23/2023 18:40:31.8525] Restarting system.
[03/23/2023 18:40:31.8825] Going down for restart now
U-Boot 2012.07 (btldr release 30) (Mar 03 2017 - 19:13:24)
This product contains some software licensed under the
"GNU General Public License, version 2" provided with
ABSOLUTELY NO WARRANTY under the terms of
"GNU General Public License, version 2", available here:
http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
DRAM: 1 GiB
NAND (ONFI): Detected SPANSION S34MS02G2 [256 MiB]
SF: Detected Macronix MX25U3235F [4 MiB]
MFG data loaded
Scanning shenv data blocks
Total valid parts=4
Active shenv part[0:0], write_counter=9
PCI0 Link Intialized
PCI1 Link Intialized
Net:
PHY ID = 0x4dd074, eth0 found AR8033 PHY
PHY ID = 0x4dd074, eth1 found AR8033 PHY
Valid I2C chip addresses: 51 52
AP 1832 . detected...
Power Type: Power Brick detected...
Signature returns 0
BL signing verification success, continue to run...
Auto boot mode, use bootipq directly
Hit ESC key to stop autoboot: 0
Specified BOOT: part1
Booting from part1
Read 1024 bytes from volume part1 to 45000000
Read 47891785 bytes from volume part1 to 45000000
Signature returns 0
Image signing verification success, continue to run...
Using machid 0x1260 from environment
Starting image ...
[01/01/1970 00:00:00.0000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5387d
[01/01/1970 00:00:00.0000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[01/01/1970 00:00:00.0000] Machine: Cisco Systems 11ac Wave2 Wifi Access Point
[01/01/1970 00:00:00.0000] Memory policy: ECC disabled, Data cache writealloc
[01/01/1970 00:00:00.0000] Kernel command line: ubi.mtd=0 crashkernel=500M-:64M@1280M console=ttyHSL1,9600n8 activepart=part1 activeboot=0 wdgtriggered=0
[01/01/1970 00:00:00.1500] CPU1: Booted secondary processor
[01/01/1970 00:00:00.2200]
[01/01/1970 00:00:00.2200] +++ hydra_ap_gpio_value =2
[01/01/1970 00:00:29.8908] ACPU PVS: 2
[01/01/1970 00:00:32.4000] buginf tty flushing thread started, ttyport=ef3f5690
[*01/01/1970 00:00:38.6981] buginf() enabled.
[*01/01/1970 00:00:38.7080] Made it into bootsh: Dec 11 2017 19:17:50
[*01/01/1970 00:00:38.7080] bootsh build T-77294235f9c17ab4e3b18b46a484118a1eb8a4b6-g77294235-vipendya
Welcome to Cisco.
Usage of this device is governed by Cisco's End User License Agreement,
available at:
http://www.cisco.com/c/en/us/td/docs/general/warranty/English/EU1KEN_.html.
Restricted Rights Legend
Use, duplication, or disclosure by the Government is subject to
restrictions as set forth in subparagraph (c) of the Commercial
Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and
subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
This product contains some software licensed under the
"GNU General Public License, version 2" provided with
ABSOLUTELY NO WARRANTY under the terms of
"GNU General Public License, version 2", available here:
http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
This product contains some software licensed under the
"GNU Library General Public License, version 2" provided
with ABSOLUTELY NO WARRANTY under the terms of "GNU Library
General Public License, version 2", available here:
http://www.gnu.org/licenses/old-licenses/lgpl-2.0.html
This product contains some software licensed under the
"GNU Lesser General Public License, version 2.1" provided
with ABSOLUTELY NO WARRANTY under the terms of "GNU Lesser
General Public License, version 2.1", available here:
http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html
This product contains some software licensed under the
"GNU General Public License, version 3" provided with
ABSOLUTELY NO WARRANTY under the terms of
"GNU General Public License, Version 3", available here:
http://www.gnu.org/licenses/gpl.html.
This product contains some software licensed under the
"GNU Affero General Public License, version 3" provided
with ABSOLUTELY NO WARRANTY under the terms of
"GNU Affero General Public License, version 3", available here:
http://www.gnu.org/licenses/agpl-3.0.html.
error: open /dev/board-config
error: open /dev/board-config
error: open /dev/board-config
error: open /dev/board-config
init started: BusyBox v1.23.2 (2017-12-11 18:56:13 PST)
[*01/01/1970 00:00:42.1770] GCM-128 POST passed
[*01/01/1970 00:00:42.1770] GCM-256 POST passed
[*01/01/1970 00:00:42.3369] Volume ID 4, size 372 LEBs (47235072 bytes, 45.0 MiB), LEB size 126976 bytes (124.0 KiB), dynamic, name "storage2", alignment 1
[*01/01/1970 00:00:42.4969] Volume ID 4, size 372 LEBs (47235072 bytes, 45.0 MiB), LEB size 126976 bytes (124.0 KiB), dynamic, name "storage2", alignment 1
[*01/01/1970 00:00:42.5269] mount: mounting /dev/ubivol/storage2 on /storage2 failed: Invalid argument
Jan 1 00:00:42 FIPS[1595]: *** shell: FIPS Mode = disabled ***
[*01/01/1970 00:00:42.7968] Active version: 8.6.101.0
[*01/01/1970 00:00:42.7968] Backup version: 8.5.161.0
User Access Verification
Username: [*01/01/1970 00:00:43.0067]
[*01/01/1970 00:00:43.0067] led pattern module start
[*01/01/1970 00:00:43.0567] AP1832I
[*01/01/1970 00:00:43.1567] nss_driver - Turbo Support 1
[*01/01/1970 00:00:43.1567] Supported Frequencies - 110Mhz 550Mhz 733Mhz
[*01/01/1970 00:00:43.1866] NSS firmware booted
[*01/01/1970 00:00:43.2166] NSS firmware booted
[*01/01/1970 00:00:43.6865] Current value of FACTORY_RESET=0
[*03/31/2020 23:59:59.0000] Last reload time: Mar 23 18:40:28 2023
[*03/23/2023 18:40:28.0000] Setting system time Thu Mar 23 18:40:28 UTC 2023
[*03/23/2023 18:40:28.0799] device wired0 entered promiscuous mode
[*03/23/2023 18:40:28.5098] stile module dp init successfully
[*03/23/2023 18:40:28.5098] NBAR Label:BLD_MCP_DEV_LATEST_20150424_123021 NBAR VERSION:module build date: Dec 11 2017 at 19:14:44
[*03/23/2023 18:40:29.2396] miibus get eec80c00!
[*03/23/2023 18:40:29.2796]
[*03/23/2023 18:40:29.2796] boot 433 build T-77294235f9c17ab4e3b18b46a484118a1eb8a4b6-g77294235-vipendya board corsica mac 5C:E1:76:80:3D:E0
[*03/23/2023 18:40:29.2896] Module: mbedtls .text=0xbf000000 data=0xbf007e18 bss=0xbf008070
[*03/23/2023 18:40:29.2896] Module: aptrace .text=0xbf00c000 data=0xbf01a82c bss=0xbf01ada0
[*03/23/2023 18:40:29.2896] Module: led_module .text=0xbf024000 data=0xbf0244e0 bss=0xbf024b48
[*03/23/2023 18:40:29.2896] Module: qca_nss_gmac .text=0xbf028000 data=0xbf02ebbc bss=0xbf02f080
[*03/23/2023 18:40:29.2896] Module: qca_nss_drv .text=0xbf038000 data=0xbf053f80 bss=0xbf054d30
[*03/23/2023 18:40:29.2896] Module: qca_nss_capwapmgr .text=0xbf075000 data=0xbf079a74 bss=0xbf079bc8
[*03/23/2023 18:40:29.2896] Module: nssmgrctl .text=0xbf080000 data=0xbf0817d0 bss=0xbf081b08
[*03/23/2023 18:40:29.2896] Module: proclikefs .text=0xbf087000 data= bss=0xbf087b40
[*03/23/2023 18:40:29.2896] Module: stile_lm_ft .text= data= bss=
[*03/23/2023 18:40:29.2896] Module: stile_lm_dp .text= data= bss=
[*03/23/2023 18:40:29.2896] Module: ipv6 .text=0xbfa1c000 data=0xbfa4cf00 bss=0xbfa4e7ac
[*03/23/2023 18:40:29.2896] Module: bonding .text=0xbfa68000 data=0xbfa79628 bss=0xbfa79a54
[*03/23/2023 18:40:29.2896] Module: lowmemorykiller .text=0xbfa86000 data=0xbfa862c0 bss=0xbfa8644c
[*03/23/2023 18:40:29.2896] Module: qca_nss_profile_drv .text=0xbfa8a000 data=0xbfa8b324 bss=0xbfa8b498
[*03/23/2023 18:40:29.2896] Module: scsi_wait_scan .text= data= bss=
[*03/23/2023 18:40:29.2896] Module: ssdk_reg .text=0xbfa94000 data= bss=0xbfa94838
[*03/23/2023 18:40:29.7894] Last reload reason : 1: reload command
[*03/23/2023 18:40:31.3989] __mm_init_module
[*03/23/2023 18:40:31.4489]
[*03/23/2023 18:40:31.4489] __ol_ath_attach() Allocated scn ee440480
[*03/23/2023 18:40:31.4689] ol_ath_attach interface_id 0
[*03/23/2023 18:40:31.4689] Chip id: 0x9, chip version: 0x1000000
[*03/23/2023 18:40:31.4689]
[*03/23/2023 18:40:31.4689] Target Version is 1000000
[*03/23/2023 18:40:31.4689]
[*03/23/2023 18:40:31.4689] Flash Download Address c0000
[*03/23/2023 18:40:31.4689] ol_transfer_bin_file: flash data file defined
[*03/23/2023 18:40:31.4689] Cal location [0]: 00000000
[*03/23/2023 18:40:31.4689]
[*03/23/2023 18:40:31.4689] Wifi0 NAND FLASH Select OFFSET 0x1000
[*03/23/2023 18:40:31.4889] qc98xx_verify_checksum: flash checksum passed: 0xafda
[*03/23/2023 18:40:31.4889] ol_transfer_bin_file 3982: Download Flash data len 12064
[*03/23/2023 18:40:31.5089]
[*03/23/2023 18:40:31.5089] Board data initialized
[*03/23/2023 18:40:31.5589] ol_ath_download_firmware :First OTP download and Execute is good address:0xa000 return param 4660
[*03/23/2023 18:40:31.5589] ol_ath_download_firmware:##Board Id 8 , CHIP Id 1
[*03/23/2023 18:40:31.5589] ol_transfer_bin_file: Board Data File download to address=0xc0000 file name=AR900B/hw.2/boardData_AR900B_CUS260_negative_pwr_offset_2G_v2_008.bin
[*03/23/2023 18:40:31.6389]
[*03/23/2023 18:40:31.6389] [Flash] : Ignore Module param
[*03/23/2023 18:40:31.6389] ol_ath_download_firmware : Second OTP download and Execute is good, param=0x0
[*03/23/2023 18:40:31.6589] ol_transfer_bin_file: Downloading firmware file: AR900B/hw.2/athwlan.bin
[*03/23/2023 18:40:32.7585] HTC Rx: insufficient length, got:4 expected =8
[*03/23/2023 18:40:32.7685] Startup Mode-0 set
[*03/23/2023 18:40:32.7685] HTC Service:0x0300 ep:1 TX flow control disabled
[*03/23/2023 18:40:32.7685] HTC Service:0x0100 ep:2 TX flow control disabled
[*03/23/2023 18:40:32.7685] Firmware_Build_Number:70
[*03/23/2023 18:40:32.7685] num_rf_chain:0x00000003 ht_cap_info:0x0000185b vht_cap_info:0x339a79b2 vht_supp_mcs:0x0000ffea
[*03/23/2023 18:40:32.7685]
[*03/23/2023 18:40:32.7685] RES CFG Support wmi_service_bitmap 9778
[*03/23/2023 18:40:32.7685]
[*03/23/2023 18:40:32.7685] Sending Ext resource cfg: HOST PLATFORM as 0 and fw_feature_bitmap as 50 to TGT
[*03/23/2023 18:40:32.7685] ol_ath_service_ready_event: sw_cal_support_check_flag: 1
[*03/23/2023 18:40:32.8385] wmi_ready_event_rx: WMI UNIFIED READY event
[*03/23/2023 18:40:32.8385] htt_h2t_frag_desc_bank_cfg_msg - HTT_H2T_MSG_TYPE_FRAG_DESC_BANK_CFG sent to FW for radio ID = 0
[*03/23/2023 18:40:32.8485] spectral_init_netlink 78 NULL SKB
[*03/23/2023 18:40:32.8485] ACS not enabled
[*03/23/2023 18:40:32.8485] ol_ath_thermal_mitigation_attach: --
[*03/23/2023 18:40:32.8485]
[*03/23/2023 18:40:32.8485] __ol_ath_attach() Allocated scn edec0480
[*03/23/2023 18:40:32.8585] ol_ath_attach interface_id 1
[*03/23/2023 18:40:32.8585] Chip id: 0x9, chip version: 0x1000000
[*03/23/2023 18:40:32.8585]
[*03/23/2023 18:40:32.8585] Target Version is 1000000
[*03/23/2023 18:40:32.8585]
[*03/23/2023 18:40:32.8585] Flash Download Address c0000
[*03/23/2023 18:40:32.8585] ol_transfer_bin_file: flash data file defined
[*03/23/2023 18:40:32.8585] Cal location [1]: 00004000
[*03/23/2023 18:40:32.8585]
[*03/23/2023 18:40:32.8585] wifi1 NAND FLASH Select OFFSET 0x5000
[*03/23/2023 18:40:32.8785] qc98xx_verify_checksum: flash checksum passed: 0xbab4
[*03/23/2023 18:40:32.8785] ol_transfer_bin_file 3982: Download Flash data len 12064
[*03/23/2023 18:40:32.8985]
[*03/23/2023 18:40:32.8985] Board data initialized
[*03/23/2023 18:40:32.9485] ol_ath_download_firmware :First OTP download and Execute is good address:0x9c00 return param 4660
[*03/23/2023 18:40:32.9485] ol_ath_download_firmware:##Board Id 7 , CHIP Id 1
[*03/23/2023 18:40:32.9485] ol_transfer_bin_file: Board Data File download to address=0xc0000 file name=AR900B/hw.2/boardData_AR900B_CUS239_negative_pwr_offset_5G_v2_007.bin
[*03/23/2023 18:40:33.0284]
[*03/23/2023 18:40:33.0284] [Flash] : Ignore Module param
[*03/23/2023 18:40:33.0284] ol_ath_download_firmware : Second OTP download and Execute is good, param=0x0
[*03/23/2023 18:40:33.0584] ol_transfer_bin_file: Downloading firmware file: AR900B/hw.2/athwlan.bin
[*03/23/2023 18:40:33.7682] FWLOG: [49493] WAL_DBGID_TX_AC_BUFFER_SET ( 0x3, 0x1e, 0x94c, 0x94c, 0x0 )
[*03/23/2023 18:40:33.7682] FWLOG: [49493] WAL_DBGID_TX_AC_BUFFER_SET ( 0x12, 0x1e, 0x94c, 0x94c, 0x0 )
[*03/23/2023 18:40:33.7682] FWLOG: [49493] WAL_DBGID_TX_AC_BUFFER_SET ( 0x45, 0x1e, 0x94c, 0x94c, 0x0 )
[*03/23/2023 18:40:33.7682] FWLOG: [49493] WAL_DBGID_TX_AC_BUFFER_SET ( 0x67, 0x1e, 0x94c, 0x94c, 0x0 )
[*03/23/2023 18:40:34.1581] HTC Rx: insufficient length, got:4 expected =8
[*03/23/2023 18:40:34.1581] Startup Mode-0 set
[*03/23/2023 18:40:34.1581] HTC Service:0x0300 ep:1 TX flow control disabled
[*03/23/2023 18:40:34.1581] HTC Service:0x0100 ep:2 TX flow control disabled
[*03/23/2023 18:40:34.1581] Firmware_Build_Number:70
[*03/23/2023 18:40:34.1581] num_rf_chain:0x00000004 ht_cap_info:0x0000185b vht_cap_info:0x339b79b2 vht_supp_mcs:0x0000ffaa
[*03/23/2023 18:40:34.1581]
[*03/23/2023 18:40:34.1581] RES CFG Support wmi_service_bitmap 9778
[*03/23/2023 18:40:34.1581]
[*03/23/2023 18:40:34.1581] Sending Ext resource cfg: HOST PLATFORM as 0 and fw_feature_bitmap as 50 to TGT
[*03/23/2023 18:40:34.1581] ol_ath_service_ready_event: sw_cal_support_check_flag: 1
[*03/23/2023 18:40:34.2281] wmi_ready_event_rx: WMI UNIFIED READY event
[*03/23/2023 18:40:34.2281] htt_h2t_frag_desc_bank_cfg_msg - HTT_H2T_MSG_TYPE_FRAG_DESC_BANK_CFG sent to FW for radio ID = 1
[*03/23/2023 18:40:34.2380] acfg_attach: Offload using existing sock edf71a00
[*03/23/2023 18:40:34.2380] spectral_init_netlink 78 NULL SKB
[*03/23/2023 18:40:34.2380] ACS not enabled
[*03/23/2023 18:40:34.2380] ol_ath_thermal_mitigation_attach: --
[*03/23/2023 18:40:34.2780] pktlog_init: Initializing Pktlog for AR900B, pktlog_hdr_size = 16
[*03/23/2023 18:40:34.2780] pktlog_init: Initializing Pktlog for AR900B, pktlog_hdr_size = 16
[*03/23/2023 18:40:35.1578] FWLOG: [50879] WAL_DBGID_TX_AC_BUFFER_SET ( 0x3, 0x1e, 0x94c, 0x94c, 0x0 )
[*03/23/2023 18:40:35.1578] FWLOG: [50879] WAL_DBGID_TX_AC_BUFFER_SET ( 0x12, 0x1e, 0x94c, 0x94c, 0x0 )
[*03/23/2023 18:40:35.1578] FWLOG: [50879] WAL_DBGID_TX_AC_BUFFER_SET ( 0x45, 0x1e, 0x94c, 0x94c, 0x0 )
[*03/23/2023 18:40:35.1578] FWLOG: [50879] WAL_DBGID_TX_AC_BUFFER_SET ( 0x67, 0x1e, 0x94c, 0x94c, 0x0 )
[*03/23/2023 18:40:36.0575] pid 2621's current affinity mask: 3
[*03/23/2023 18:40:36.0575] pid 2621's new affinity mask: 1
[*03/23/2023 18:40:38.5067]
[*03/23/2023 18:40:38.5067] Click sched monitor: schedulers = 1
[*03/23/2023 18:40:41.6157] click-config/io-real.click:139: While configuring 'todev_wired0 :: ToDevice':
[*03/23/2023 18:40:41.6157] warning: device 'wired0' is down
[*03/23/2023 18:40:41.6557] click-config/io-real.click:139: While configuring 'fromdev_wired0 :: FromDevice':
[*03/23/2023 18:40:41.6557] warning: device 'wired0' is down
[*03/23/2023 18:40:42.5754] click-config/io-real.click:139: While initializing 'tohost_wired0 :: ToHost':
[*03/23/2023 18:40:42.5754] warning: device 'wired0' is down
[*03/23/2023 18:40:43.0653] wmi_dbg_cfg_send: mod[0]00000000 dbgcfg40000000 cfgvalid[0] 00000000 cfgvalid[1] 00000000
[*03/23/2023 18:40:43.0653] wmi_dbg_cfg_send: mod[0]00000000 dbgcfg40000000 cfgvalid[0] 00000000 cfgvalid[1] 00000000
[*03/23/2023 18:40:44.1549] chatter: tohost_srcr6 :: ToHost: device 'srcr6' went down
[*03/23/2023 18:40:44.1749] chatter: tohost_srcr6 :: ToHost: device 'srcr6' came up
[*03/23/2023 18:40:44.1849] ip6_port srcr6, ip6local ip6(not used), ip6 ::, plen 0, gw6 ::, gw6_mac 00:00:00:00:00:00, mtu 1500, vid 0, mode6 3(slaac)
[*03/23/2023 18:40:45.6145] wired0: 1000 Mbps Full Duplex
[*03/23/2023 18:40:45.6145]
[*03/23/2023 18:40:52.2025] Loading sha2...
[*03/23/2023 18:40:52.2025] Dumpping sha1...
[*03/23/2023 18:40:53.8820] Loading MIC cert and key
[*03/23/2023 18:40:53.8820] Dumpping sha2...
[*03/23/2023 18:40:55.5214] Loading MIC cert and key
[*03/23/2023 18:40:55.9213] Generating key, this may take a while...
[*03/23/2023 18:40:57.4408] Public key portion is:
[*03/23/2023 18:40:57.4408] ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQDXfRMk8jnconUPlZWHM01PTU4Oqhv4uqlFV7rQNU+hOi9Pjng6MR51iUebnPCZhDwCW42cQHJ6jkIfb4Fe6gRtrH9CMsqZm+IBhDrkFSExtVhPWSh5bQ6GFb2hFSj/XxA9RQxPiprytH07lysrVo+J8uU1sJxaBAsPzYhM74aIkOCzltaDFL0PHgcY4uv/zp/fUrA7mGxir0Ab2vm9yNHElXHBpd6EBz5wFykblWZiocGlzmlipJSuZxKW7uQaOwAMCON4VH0Fr1JRMW2bnQ2FM2osmIETZxNhmWNM9QtRk9g48xQwY/5nbgx3o3sQ9Sktz3CawjSFQTvTctrBI9dd root@m5CE176803DE0
[*03/23/2023 18:40:57.4408] Fingerprint: md5 ec:12:54:f1:3b:7b:7e:85:c8:13:55:78:d0:6c:b0:69
[*03/23/2023 18:40:57.5208] pid 4141's current affinity mask: 3
[*03/23/2023 18:40:57.5208] pid 4141's new affinity mask: 1
[*03/23/2023 18:40:57.9807] Password for 'Cisco' changed
[*03/23/2023 18:40:58.1006] gzip -dc /etc/wcp.usermodule.template.gz | sed -e 's/__TX_POWER_2G_FILE__/\/radio_fw\/S2.csv/g' -e 's/__TX_POWER_5G_FILE__/\/radio_fw\/S5.csv/g' -e 's/__EVM_POWER_2G_FILE__/\/radio_fw\/EVM_2.csv/g' -e 's/__EVM_POWER_5G_FILE__/\/radio_fw\/EVM_5.csv/g' -e 's/__DOMAIN_2G__/1/g' -e 's/__DOMAIN_5G__/12/g' -e 's/__PWR_TABLE_49G__/0/g' -e 's/__PRODUCT_ID__/AIR-AP1832I-E-K9/g' -e 's/__AP_TYPE__/58/g' -e 's/__WIRELESS_MAC__/WLAN MAC/g' -e 's/__WIRED_MAC__/Wired MAC/g' -e 's/__WIRED1_MAC__/Wired MAC/g' | DMALLOC_OPTIONS=debug=0x400003,inter=1000,log=/tmp/wcp.dmalloc.log,limit=40000000 wcpd &
[*03/23/2023 18:40:59.6701] CRIT-MeshControl:
[*03/23/2023 18:40:59.6701] Mesh Control: skipped adding wired1 backhaul
[*03/23/2023 18:40:59.6801] DOT11_DRV[1]: Init Radio1
[*03/23/2023 18:40:59.7001] DOT11_DRV[1]: Stop Radio1
[*03/23/2023 18:40:59.7001] DOT11_DRV[1]: set_channel Channel set to 36
[*03/23/2023 18:40:59.7101] DOT11_DRV[0]: Init Radio0
[*03/23/2023 18:40:59.7401] DOT11_DRV[0]: Stop Radio0
[*03/23/2023 18:40:59.7501] DOT11_DRV[0]: set_channel Channel set to 6
[*03/23/2023 18:41:00.1900] DOT11_CFG[0] Radio Mode is changed from Local to FlexConnect
[*03/23/2023 18:41:00.2000] DOT11_DRV[0]: Start Radio0
[*03/23/2023 18:41:00.2000] DOT11_CFG[1] Radio Mode is changed from Local to FlexConnect
[*03/23/2023 18:41:00.2000] DOT11_DRV[1]: Start Radio1
[*03/23/2023 18:41:00.2100] DOT11_DRV[0]: Stop Radio0
[*03/23/2023 18:41:00.5599] DOT11_DRV[0]: set_channel Channel set to 1
[*03/23/2023 18:41:00.5599] DOT11_DRV[0]: Start Radio0
[*03/23/2023 18:41:00.5599] DOT11_DRV[0]: Channel set to 1, width 20
[*03/23/2023 18:41:00.5599] DOT11_DRV[0]: Stop Radio0
[*03/23/2023 18:41:00.5699] DOT11_DRV[0]: Channel set to 1, width 20
[*03/23/2023 18:41:00.5699] DOT11_DRV[0]: wifi0 acfg cmd 26 failed for wifi0 errno 22(Invalid argument)
[*03/23/2023 18:41:00.5699] DOT11_DRV[0]: vendor_set_max_client Setting Client Limit failed for Radio 0, Result: -1
[*03/23/2023 18:41:00.5699] DOT11_DRV[1]: Stop Radio1
[*03/23/2023 18:41:00.6199] DOT11_DRV[1]: set_channel Channel set to 36
[*03/23/2023 18:41:00.6298] DOT11_DRV[1]: Start Radio1
[*03/23/2023 18:41:00.6298] DOT11_DRV[1]: Stop Radio1
[*03/23/2023 18:41:01.0297] DOT11_DRV[1]: Start Radio1
[*03/23/2023 18:41:01.0297] DOT11_DRV[1]: Channel set to 36, width 20
[*03/23/2023 18:41:01.0297] DOT11_DRV[1]: Stop Radio1
[*03/23/2023 18:41:01.0397] DOT11_DRV[1]: Channel set to 36, width 20
[*03/23/2023 18:41:01.0397] DOT11_DRV[1]: wifi1 acfg cmd 26 failed for wifi1 errno 22(Invalid argument)
[*03/23/2023 18:41:01.0397] DOT11_DRV[1]: vendor_set_max_client Setting Client Limit failed for Radio 1, Result: -1
[*03/23/2023 18:41:01.0497] Failed to load flex AP config from file. Default config will be used.
[*03/23/2023 18:41:01.0497] Socket Valid Element wcp/wcp_db Handler set_vlan_name_map Data Length 10
[*03/23/2023 18:41:05.0485] Waiting for uplink IPv4 configuration
[*03/23/2023 18:41:05.0685] Gateway not reachable. IP address will not be assigned. IP:1.1.1.230/24 Gateway:1.1.1.1
[*03/23/2023 18:41:08.0875] ethernet_port wired0, ip 1.1.1.230, netmask 255.255.255.0, gw 1.1.1.1, mtu 1500, bcast 1.1.1.255, dns1 8.8.4.4, dns2 8.8.8.8, vid 0, static_ip_failover false, dhcp_vlan_failover false
[*03/23/2023 18:41:16.1850] DOT11_CFG[0] Radio Mode is changed from FlexConnect to FlexConnect
[*03/23/2023 18:41:16.1850] DOT11_CFG[1] Radio Mode is changed from FlexConnect to FlexConnect
[*03/23/2023 18:41:16.2450] AP IPv4 Address updated from 0.0.0.0 to 1.1.1.230
[*03/23/2023 18:41:16.2750] dtls_init: Use MIC certificate
[*03/23/2023 18:41:16.2750]
[*03/23/2023 18:41:16.2750] CAPWAP State: Init
[*03/23/2023 18:41:16.2750]
[*03/23/2023 18:41:16.2750] PNP is not required, Starting CAPWAP discovery
[*03/23/2023 18:41:16.2750]
[*03/23/2023 18:41:16.2750]
[*03/23/2023 18:41:16.2750] CAPWAP State: Discovery
[*03/23/2023 18:41:16.2750] Discovery Request sent to 255.255.255.255, discovery type UNKNOWN(0)
[*03/23/2023 18:41:16.2750]
[*03/23/2023 18:41:16.2750] CAPWAP State: Discovery
[*03/23/2023 18:41:17.2846] Discovery Response from 1.1.1.226
[*03/23/2023 18:43:04.0000] aptrace_add_timer: timer already added
[*03/23/2023 18:43:04.0000]
[*03/23/2023 18:43:04.0000] CAPWAP State: DTLS Setup
Username:I know the DNS will not be reachable (should be the same as the gateway), but I don't understand why I can't configure anything.
I also saw while looking for the CLI help that I still can run CAPWAP commande (even if the image is mobility express), why?
AP5CE1.7680.3DE0#capwap ap
auth-token Configure Auth Token
dot1x Configure the dot1x username and password
erase Erase CAPWAP config
ethernet Configure Ethernet parameters
hostname Configure AP hostname
ip Static IP/DNS config
lag CAPWAP lag config
mode Configure AP mode
primary-base Configuring AP's primary controller
restart Restart CAPWAP Protocol
secondary-base Configuring AP's secondary controller
tertiary-base Configuring AP's tertiary controller
AP5CE1.7680.3DE0#capwap ap mode
bridge Bridge mode
local Local ModeOptions
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-07-2025 06:20 AM
@marce1000 I posted it twice, it was deleted twice.
I guess there is a problem with posting the boot process, even if I hide the IP and MAC addresses.
While looking in the help of the terminal, I can see there are capwap commands :
AP5CE1.7680.3DE0#
Exec mode commands
ap-type Set the access point type
archive Archive commands
capwap CAPWAP exec commands
clear Reset functions
config Configure parameters
copy Copy a file
debug Debugging functions (see also 'undebug')
delete Delete a file
disable Turn off privileged commands
enable Turn on privileged commands
exec-timeout Set the exec-timeout
interface Configure VLAN interface
logging Logging commands
logout Logout out from CLI
more Display a file
no Negate a command or set its defaults
ping Send echo messages
reload Halt and perform a cold restart
show Show running system information
terminal Terminal parameters
test Test susbystems, memory and interfaces traceroute Trace route to destination
undebug Disable debugging functions (see also 'debug')
AP5CE1.7680.3DE0#capwap
ap AP commands
AP5CE1.7680.3DE0#capwap ap
ap
AP5CE1.7680.3DE0#capwap ap
auth-token Configure Auth Token
dot1x Configure the dot1x username and password
erase Erase CAPWAP config
ethernet Configure Ethernet parameters
hostname Configure AP hostname
ip Static IP/DNS config
lag CAPWAP lag config
mode Configure AP mode
primary-base Configuring AP's primary controller
restart Restart CAPWAP Protocol
secondary-base Configuring AP's secondary controller
tertiary-base Configuring AP's tertiary controllerIs it normal?
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-07-2025 07:02 AM
When following the guide, I should see a new SSID CiscoAirProvision, but I can't see it :
Fields and Their Values in the Output
What to do Next
AP Image Type: MOBILITY EXPRESS IMAGE
AP Configuration: MOBILITY EXPRESS CAPABLE
No conversion is required.
Reboot the AP and proceed to Starting the Initial Configuration Wizard.
I tested with the 2 APs, both have the good values :
AP Image type : MOBILITY EXPRESS IMAGE
AP Configuration : MOBILITY EXPRESS CAPABLEOptions
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-07-2025 08:18 AM
- @smorinval >...
Reboot the AP and proceed to Starting the Initial Configuration Wizard.- Does that work 'as announced' ?
M.
-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-11-2025 11:49 PM
Hello @marce1000 , I was off friday, I'll try again today.
From what I understood in the docs, I'll have to shut down all the existing APs to allow the new one to broadcast its SSID.
I planned to check this ASAP, I'll let you know if it works better.
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-12-2025 02:13 AM
It's solved, the key was to check that the new AP was running in mobility-express mode AND unplug the other APs.
This allowed the new AP to broadcast the AirProvision SSID and then run the initial configuration wizard.
After this wizard, I was able to import the config file from the dashboard, and now the master AP is online and the other APs and synced with it.
Many thanks @marce1000 for your help.
- « Previous
-
- 1
- 2
- Next »
Learn, share, save
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Customers Also Viewed These Support Documents
